GARMIN Edge 840 Solar

ЗАПОЗНАЈТЕ ГО ВОЗАЧОТ ШТО СТЕ ДЕНЕС СО ТОЈ КОЈ ЌЕ БИДЕТЕ УТРЕ. Подобрете се секој ден со Edge® 840 Solar, bike компјутер со екран на допир и контролиран со копчиња со насочено адаптивно тренирање. Тоа е оптимална опрема за да ве подготви за претстојните трки или лични цели.

35.980 ден. 36980.00

-3%

SKU : 010-02695-21

Достапност : Распродадено

Додади во листа на желби

Touchscreen or button controls? The choice is yours — this Edge bike computer has both.

Get up to 60 hours of battery life on a single charge in battery saver mode².

Enjoy superior accuracy with multi-band GNSS technology.

Get stamina insights¹ while you ride to know how much longer you can crush it.

Push your performance with daily suggested workouts¹.

Cycle like a local with ride type-specific maps and navigation.

TOP FEATURES

POWER GLASS™ SOLAR CHARGING EXTENDS RIDES

Get up to 60 hours in battery saver mode or up to 32 hours in intense mode. Gain an extra 25 minutes per hour from solar charging in battery saver mode during daytime rides².

ADAPTIVE COACHING

View daily suggested workouts and training prompts on screen; get personalised coaching based on your event that adapts to your current training load and recovery¹.

MULTI-BAND GNSS

Find your way with multi-band GNSS technology that provides enhanced positioning accuracy.

CLIMBPRO ASCENT PLANNER

See remaining ascent and grade when climbing so you can gauge your effort with ClimbPro, now available on every ride with no course necessary.

CYCLING ABILITY AND COURSE DEMANDS

Compare your cycling ability to the demands of a specific course and focus your training in the right areas, when paired with your compatible power meter and heart rate monitor.

POWER GUIDE

Manage your efforts with the power guide feature, which recommends power targets throughout a course, when paired with your compatible power meter.

CRUSH EVERY PART OF TRAINING

PREPARE

TRAINING STATUS

Evaluate your performance indicators to see if you’re training productively¹.

HEAT AND ALTITUDE ACCLIMATION

See how your body is holding up with heat and altitude acclimation¹.

GROUPTRACK FEATURE

Check each other’s location with GroupTrack — and track up to 50 riders at once³.

RIDE-SPECIFIC ROUTING

Get routing suited to your ride, whether you’re on mountain, gravel or road.

TRENDLINE™ POPULARITY ROUTING

Your Edge bike computer finds the best route — choosing from roads (and trails) most travelled.

EVENT GOALS

Select a race distance and time goal, then receive daily suggested workouts.

GARMIN CYCLE MAP

Ride with preloaded maps that include worldwide MTB trail data from Trailforks.

TRAIN AND PERFORM

CYCLING DYNAMICS

Advanced cycling metrics give insight on performance from variable conditions¹.

MTB DYNAMICS

Track mountain biking metrics such as jump count, jump distance and hang time.

GRIT^® AND FLOW™ METRICS

Grit rates the difficulty of a trail. Flow measures how smoothly you ride it.

TURN-BY-TURN DIRECTIONS

Stay on track with turn-by-turn directions and alerts.

BACK TO START

Get back on track — or back to start — if you’re lost or want to go home early.

NUTRITION AND HYDRATION ALERTS

Stay fuelled on a ride with notifications when it’s time to hydrate or eat.

STAMINA INSIGHTS

While you ride, get stamina insights¹ so you can keep an eye on how much you have left in the tank.

CYCLING SAFETY AND AWARENESS

COMPATIBILITY WITH VARIA™ DEVICES

Pair your Edge bike computer with your Varia rearview radar and smart lights to see and be seen.

INCIDENT DETECTION

This feature sends a message with your location³ to emergency contacts after an on- or off-road incident.

LIVETRACK FEATURE

Loved ones can follow your location, when paired with your compatible smartphone.

BIKE ALARM

A PIN-protected alarm notifies via your compatible smartphone if your bike is moved.

INREACH^® DEVICE COMPATIBILITY

Stay in touch wherever you ride by pairing with your compatible inReach device⁴.

CONNECTIVITY

SMART NOTIFICATIONS

Receive texts and alerts on your Edge bike computer, when paired with your compatible smartphone.

SMART TRAINER COMPATIBILITY

This Edge bike computer can pair with an indoor trainer to track your home rides.

EBIKE COMPATIBILITY

Connect to your eBike that’s compatible with ANT+^® technology or SHIMANO STEPS.

CONNECT IQ™ STORE

Download custom data fields, and get apps and widgets from our Connect IQ Store smartphone app.

GROUP MESSAGING

Message the pack if you get separated, when paired with your compatible smartphone.

¹When paired with compatible sensors.

²Assumes continuous 75,000 lux conditions during daytime rides

³When paired with your compatible smartphone. For safety and tracking feature requirements and limitations, see Garmin.com/safety.

⁴Satellite subscription required. Some jurisdictions regulate or prohibit the use of satellite communication devices. It is your responsibility to know and follow all applicable laws in the jurisdictions where the device is intended to be used.

TestVar id: 70 userid: 17 name: GARMIN Tacx FLUX 2 Smart тренажер VIP: 0 cat: 45 subcat: 5 subsubcat: 11 manufacturer: model: status: 1 image1: 17_2024_88671714007380.webp image2: image3: image4: image5: image6: image7: image8: image9: image10: image11: image12: short_description: The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. description: <iframe src="https://www.youtube.com/embed/l5--jinFLRQ" frameborder="0" width="100%" height="399"></iframe> <div class="row"> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>ACCURATE</h4> Measures your power accurately within 2,5%.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SILENT</h4> The most silent flywheel equipped bike trainer available.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SMART TRAINER</h4> Connect to popular training apps, like Zwift & Tacx.</div> </div>   <div class="row"> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SIMULATION RANGE</h4> Realistically simulate inclines up to a 16% gradient.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SPRINT</h4> A strong trainer with a maximum sprint resistance of 2000 watts.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>HEAVY FLYWHEEL</h4> A large 7,6 kg flywheel ensures the best ride feel.</div> </div> Линк со детали за производот - <a href="https://tacx.com/product/flux-2-smart/" rel="noopener noreferrer" target="_blank">https://tacx.com/product/flux-2-smart/</a> <h2>Спецификации</h2> <table class="shop_attributes swiper_autoheight"> <tbody> <tr class="alt subheader"><th>FEATURES</th> <td> </td> </tr> <tr><th>Type of trainer</th> <td>Working principle of Tacx trainers </h3> All Tacx trainers are magnetic trainers, the resistance is caused by a magnetic field. You can set the trainer’s resistance precisely as required as the magnitude of this field is adjustable. The result is a highly functional, contact- and maintenance-free resistance unit. The magnetic field is realized differently amid the various types of resistance units, causing a difference in the trainer’s functionality and usability. Direct drive The bike is placed in the direct drive trainer without its rear wheel; the resistance is applied directly to the rear axle. This causes a more realistic and user-friendly trainer. There are no transmissions causing any loss of power, ensuring a very realistic cycling feeling and accurate measurements of your speed, cadence and power. In addition, there is no wear and no slipping of the tyre; the direct drive is maintenance free and your bike is easily mounted on it. Motor brake The motor brake is the most advanced resistance unit producing the most realistic cycling feeling. The resistance is calculated and generated by an electromotor. The motor can both hold back (brake) and drive the wheel or chain, enabling the simulation of a descent. It will keep spinning; just like outdoors you do not have to pedal. This downhill drive feature also enables a realistic simulation of the dead point in your pedal stroke. In addition, the motor brake is the most powerful and can generate high resistance at low speeds. This makes the motor brake especially suited for simulating steep climbs. Due to these features, Tacx trainers with a motor brake are ideally suited for training on mountain stages. Wireless motor brake A wireless motor brake is an electromotor with a generator; it generates its own energy from your pedal stroke. The trainer uses this energy to communicate and produce the needed resistance. As the trainer does not require an external power source, it can be placed anywhere you like. As its power is generated from your movement, the trainer cannot simulate a descent. You are not pedalling, so it cannot generate any energy. Electro brake An electro brake features one row with electromagnets and one with permanent magnets, with a rotating disc in between. The resistance is set automatically by increasing or decreasing the current through the electromagnets. Magnet brake The resistance is realized by permanent magnets so trainers with a magnet brake do not require power. The Booster features two rows of magnets; other basic trainers feature one row of magnets and a disc. The magnetic field increases or decreases by changing the position of the magnets, which is done manually with a lever to set the resistance. The Satori Smart is equipped with a long-life battery to enable communication. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/11/Tacx-trainers-working-principle-1920x1080px-1.jpg">Interactive Smart direct drive with electric brake</td> </tr> <tr class="alt"><th>Magnets</th> <td>8 Permanent ferrite magnets & 8 electromagnets</td> </tr> <tr><th>Transmission</th> <td>None</td> </tr> <tr class="alt"><th>Electrical requirements</th> <td>110-240 Volt</td> </tr> <tr><th>Power indicator</th> <td>None</td> </tr> <tr class="alt"><th>Connection indicator (ANT/BT)</th> <td>2 LEDs</td> </tr> <tr><th>Firmware upgradable</th> <td>Yes</td> </tr> <tr class="alt"><th>Suitable cassettes</th> <td>Not suitable for Specialized SCS system , Shimano & SRAM: 8 - 11 speed. Campagnolo, SRAM XD and XD-R body sold separately</td> </tr> <tr><th>Suitable axles</th> <td>Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.</td> </tr> <tr class="alt"><th>Suitable bikes</th> <td>Race, Tri & MTB</td> </tr> <tr><th>Supplied with</th> <td>Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software</td> </tr> <tr class="alt subheader-padding"><th> </th> <td> </td> </tr> <tr class="alt subheader"><th>SPECIFICATIONS</th> <td> </td> </tr> <tr><th>Max. power (40 km/h)</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">2000 Watt</td> </tr> <tr class="alt"><th>Max. incline</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">16%</td> </tr> <tr><th>Simulation of descent</th> <td>No</td> </tr> <tr class="alt"><th>Max. torque</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">41 Nm</td> </tr> <tr><th>Max. brake force</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">120 N</td> </tr> <tr class="alt"><th>Flywheel</th> <td>The flywheel</h3> To make the cycling feeling as realistic as possible, all Tacx trainers are equipped with a flywheel. When you are cycling outdoors and stop pedalling, your bike does not stop rolling immediately. The same effect is seen in the dead point of your pedal stroke. The kinetic energy causing the bike to keep rolling is simulated by the trainer’s flywheel; this is called the flywheel effect or mass inertia. The heavier the flywheel, the more realistic the cycling feeling. Virtual flywheel Tacx trainers are equipped with an actual or a virtual flywheel. The best experience is achieved with an exact simulation of the rider’s weight, which is only possible with a virtual flywheel. In this case, the trainer simulates the mass inertia instead of producing it with an actual flywheel. In contrast to the actual flywheel, the virtual flywheel can adjust the mass inertia to the circumstances; like speed, slope and weight. For example, when you ride up a mountain you will experience a different cycling feeling than when you are riding with high speed on a flat road. Therefore, the virtual flywheel is the best solution for an optimal cycling experience. Trainers equipped with a virtual flywheel are the NEO Smart and Genius models. The Bushido Smart is a combination of an actual and virtual flywheel. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-flywheel-1920x1080px-1-1920x1080.jpg">Actual of 7.6 kg</td> </tr> <tr><th>Mass inertia</th> <td>31.2kg</td> </tr> <tr class="alt"><th>Calibration</th> <td>Spin down</td> </tr> <tr><th>Footprint (lxw)</th> <td>670 x 642 mm (26.4 x 25.3 in)</td> </tr> <tr class="alt"><th>Height</th> <td>460 mm (18.1 in)</td> </tr> <tr><th>Dimensions when folded</th> <td>Not foldable</td> </tr> <tr class="alt"><th>Weight</th> <td>23.6kg (52lbs)</td> </tr> <tr><th>Article number</th> <td>T2980</td> </tr> <tr class="alt subheader-padding"><th> </th> <td> </td> </tr> <tr class="alt subheader"><th>DATA OUTPUT AND CONTROL</th> <td> </td> </tr> <tr><th>Wireless communication</th> <td>Smart technology</h3> Smart technology refers to the Smart electronics products use to communicate. Tacx Smart trainers can be connected to any device, and several devices simultaneously, as they communicate via ANT+ and Bluetooth® Smart. Tacx Smart trainers are characterized by the following features: 1. Open wireless communication 2. Measuring and receiving performance data 3. Upgradable firmware 4. Standalone training Open wireless communication The functionality of Tacx Smart trainers is improved by enabling the communication with as many devices and apps as possible. This way you can use almost any training option. This is realized by using standardized wireless communication protocols: ANT+ FE-C and Bluetooth Smart open. ANT+ FE-C protocol The ANT+ FE-C protocol enables Smart trainers to communicate with third party software on desktops, bike computers and sport watches. The interactive trainers can be controlled by Tacx software, or other computer software like Zwift and the Garmin Edge 520. We got to work directly after ANT+ launched the ANT+ FE-C protocol. The result: our indoor trainers are the first to be ANT+ FE-C certified and use the new language. ANT+ FE-C stands for “ANT+ Fitness Equipment Control”. Until now, trainers of various brands communicated in their own language. Therefore they did not understand each other and could not communicate. By implementing the new language – the ANT+ FE-C open profile – in trainers and software they are able to communicate and connect with each other. Bluetooth Smart This is also called Bluetooth 4.0 and Bluetooth low energy and enables communication with smartphones, tablets and sport watches. With Bluetooth Smart the interactive trainers are controlled by Tacx apps and other apps such as TrainerRoad and Kinomap. After creating the ANT+ FE-C open protocol, we started creating an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal, not the ANT+ signal. By sending the same language as the ANT+ FE-C protocol via Bluetooth, Smart trainers can also communicate with third party apps on devices that only have a Bluetooth receiver. This protocol has been created by Tacx and is available to software manufacturers, so that everybody can link a Tacx Smart trainer to the software of their choice. Connect to multiple devices simultaneously As the trainer uses both communication protocols, it can connect to several devices at the same time. For example, you can ride a Tacx Film on your tablet while reading and storing your performance data in Garmin Connect on your bike computer. This way you can keep track of your performance in your favourite apps. Measure and receive performance data All Tacx Smart trainers measure your speed, cadence and power and transmit this via ANT+ and Bluetooth Smart so that it can be received at several devices simultaneously. The interactive trainers can also receive these signals in order to adjust the resistance. To receive your heart rate you will need a heart rate monitor that communicates via ANT+ or Bluetooth 4.0. The monitor is connected to the app you are using, and the app communicates this to the trainer. Upgradable firmware Product optimizations and improving the trainers’ functionalities is a continuous project at Tacx. You can add firmware improvements, for example for the cycling feeling or an extra feature, to the Smart trainer you are already using with the Tacx Utility app. This free app is available in the App store and on Google Play. After installing the app you can test whether there is a firmware update available and if yes, directly upgrade your trainer. This way you always profit from the latest firmware! Standalone training Tacx Smart trainers also function without being connected to a device; they will simulate a flat road. This is perfect for straightforward, short training as you simply get on and start riding. As soon as you start pedalling the trainer recognizes it is not connected and calculates the needed resistance for a flat road. In doing so, it takes all relevant factors into account, like rolling resistance and air resistance. This ensures a very realistic simulation of a flat road. The resistance changes progressively: the higher your speed, the higher the resistance. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Smart-technology-1920x1080px-1920x1080.jpg">ANT+ FE-C , Smart technology</h3> Smart technology refers to the Smart electronics products use to communicate. Tacx Smart trainers can be connected to any device, and several devices simultaneously, as they communicate via ANT+ and Bluetooth® Smart. Tacx Smart trainers are characterized by the following features: 1. Open wireless communication 2. Measuring and receiving performance data 3. Upgradable firmware 4. Standalone training Open wireless communication The functionality of Tacx Smart trainers is improved by enabling the communication with as many devices and apps as possible. This way you can use almost any training option. This is realized by using standardized wireless communication protocols: ANT+ FE-C and Bluetooth Smart open. ANT+ FE-C protocol The ANT+ FE-C protocol enables Smart trainers to communicate with third party software on desktops, bike computers and sport watches. The interactive trainers can be controlled by Tacx software, or other computer software like Zwift and the Garmin Edge 520. We got to work directly after ANT+ launched the ANT+ FE-C protocol. The result: our indoor trainers are the first to be ANT+ FE-C certified and use the new language. ANT+ FE-C stands for “ANT+ Fitness Equipment Control”. Until now, trainers of various brands communicated in their own language. Therefore they did not understand each other and could not communicate. By implementing the new language – the ANT+ FE-C open profile – in trainers and software they are able to communicate and connect with each other. Bluetooth Smart This is also called Bluetooth 4.0 and Bluetooth low energy and enables communication with smartphones, tablets and sport watches. With Bluetooth Smart the interactive trainers are controlled by Tacx apps and other apps such as TrainerRoad and Kinomap. After creating the ANT+ FE-C open protocol, we started creating an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal, not the ANT+ signal. By sending the same language as the ANT+ FE-C protocol via Bluetooth, Smart trainers can also communicate with third party apps on devices that only have a Bluetooth receiver. This protocol has been created by Tacx and is available to software manufacturers, so that everybody can link a Tacx Smart trainer to the software of their choice. Connect to multiple devices simultaneously As the trainer uses both communication protocols, it can connect to several devices at the same time. For example, you can ride a Tacx Film on your tablet while reading and storing your performance data in Garmin Connect on your bike computer. This way you can keep track of your performance in your favourite apps. Measure and receive performance data All Tacx Smart trainers measure your speed, cadence and power and transmit this via ANT+ and Bluetooth Smart so that it can be received at several devices simultaneously. The interactive trainers can also receive these signals in order to adjust the resistance. To receive your heart rate you will need a heart rate monitor that communicates via ANT+ or Bluetooth 4.0. The monitor is connected to the app you are using, and the app communicates this to the trainer. Upgradable firmware Product optimizations and improving the trainers’ functionalities is a continuous project at Tacx. You can add firmware improvements, for example for the cycling feeling or an extra feature, to the Smart trainer you are already using with the Tacx Utility app. This free app is available in the App store and on Google Play. After installing the app you can test whether there is a firmware update available and if yes, directly upgrade your trainer. This way you always profit from the latest firmware! Standalone training Tacx Smart trainers also function without being connected to a device; they will simulate a flat road. This is perfect for straightforward, short training as you simply get on and start riding. As soon as you start pedalling the trainer recognizes it is not connected and calculates the needed resistance for a flat road. In doing so, it takes all relevant factors into account, like rolling resistance and air resistance. This ensures a very realistic simulation of a flat road. The resistance changes progressively: the higher your speed, the higher the resistance. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Smart-technology-1920x1080px-1920x1080.jpg">Bluetooth Smart open</td> </tr> <tr class="alt"><th>Control by</th> <td>ANT+FE-C bike computers , Connect to computer via ANT+antenna , Smartphone , Stand alone , Tablet</td> </tr> <tr><th>Output</th> <td>Cadence , Power , Speed</td> </tr> <tr class="alt"><th>Read out on</th> <td>Bike computer , Computer with ANT+ antenna , Smartphone , Sports watch , Tablet</td> </tr> <tr><th>Accuracy</th> <td><2.5%</td> </tr> </tbody> </table> characteristics: meta_title: meta_keywords: meta_description: url: measure: order_by: 0 date_created: 2024-10-14 15:55:14 image: 17_2024_88671714007380.webp price: 48980.00 price2: 0.00 item_id: 68

Cart