×

Cart

Subtotal:
НАМАЛЕНИ ЦЕНИ - ЛИНК - ПОГЛЕДНИ ПОВЕЌЕ  

GARMIN Edge MTB

ВЕЛОСИПЕДСКИ КОМПЈУТЕР ЗА ПЛАНИНСКИ ВЕЛОСИПЕД

Создаден за патеката. Направен за вашите граници – велосипедскиот компјутер Edge MTB специјално за гравитациски планински велосипедисти. Новите профили Enduro MTB и Downhill MTB нудат уште попрецизно снимање на патеката благодарение на повеќефреквентниот прием и GPS снимањето.

24.780 ден.
Достапност : Бесплатна достава во Македонија. Рок за испорака 1-3 работни дена.

THE CYCLE COMPUTER FOR MOUNTAIN BIKING

Built for the trail. Made for your limits – the Edge MTB bike computer specifically for gravity mountain bikers. The new Enduro MTB and Downhill MTB profiles offer even more accurate track recording thanks to multi-frequency reception and GPS recording at 5 Hertz.

ROBUST DESIGN WITH SCRATCH-RESISTANT CORNING® GORILLA® GLASS

UP TO 14 HOURS BATTERY LIFE IN GPS MODE

ENDURO AND DOWNHILL MTB PROFILES

5 Hz GPS recording during rides with enduro or downhill profiles

PRE-INSTALLED WITH TRAILFORKS MAPS AND FORKSIGHT MODE

AUTOMATIC TRACKING OF SPLIT TIMES DURING RUNS

YOU WILL LOVE THIS

BUILT TO SHREDDED

The extremely robust Edge MTB is designed specifically for gravity mountain bikers. Thanks to its seven-button control and Corning Gorilla Glass, it's ready for any ride.

ENDURO AND DOWNHILL MTB PROFILES

The Enduro MTB and Downhill MTB activity profiles provide all the data you need for your ride. The Enduro profile shows your elevation and descent for the run and the entire activity. The Downhill profile saves a lap once you've finished your descent and boarded the lift or shuttle.

5 HERTZ GPS RECORDING

The 5 Hz GPS recording records your track in the Enduro and Downhill MTB profiles at 5 data points per second. This provides even more accurate track recording and allows for even more precise split times.

TRAIL DATA

Use the preloaded Trailforks MTB map with integrated trail network to find new trails in your area. ForkSight provides detailed information on the distance to the trail, as well as its length, elevation gain, descent, and difficulty.

SPLIT TIMES

Set start and timing points along a trail and compare your performance based on the split times between the points. This way, you can draw conclusions about the fastest line and improve from run to run.

BATTERY LIFE

The Edge MTB is designed for long, full-day rides. The battery lasts up to 14 hours in intensive use and up to 26 hours in power-save mode. So you don't have to worry about charging while you shred.

ESPECIALLY ROBUST WITH INNOVATIVE FUNCTIONS

PREPARATION


MAPS FOR EVERY RIDE

Use pre-installed maps for paved or unpaved paths, roads, and more on your rides. Plus, get worldwide MTB trail data from Trailforks.

TOUR-SPECIFIC MAPS

Optimized maps highlight popular roads and trails and show you points of interest.

TRENDLINE™ POPULARITY MAP

Your Edge will find the best route using the roads (and trails) most frequently used by other Garmin cyclists.

VO2MAX

See your current fitness level and track long-term changes to set goals, evaluate your progress, and more when you use a compatible power meter and heart rate monitor.

RECOVERY TIME

Find out how long you should rest before your next intense workout. This depends on your last workout and whether you're wearing a compatible heart rate monitor.

 

GARMIN COACH

Train for a race, reach a milestone, or improve your fitness with Garmin Coach training plans for all types of cyclists. Even incorporate strength training into your plan.

GROUPRIDE FEATURES

GroupRide makes it easy to organize group rides. Share the route and stay in touch with everyone during the ride 1 , receive incident notifications 2 , compare your performance on leaderboards, and earn awards.

DAILY TRAINING RECOMMENDATIONS

Get daily training recommendations based on your current training load and VO2 max when using a compatible power meter and heart rate monitor.

 
 
 

TRAINING AND PERFORMANCE


CLIMBPRO: PLAN CLIMBS CORRECTLY

See the remaining climb and the gradient during the current climb so you can ration your energy.

CYCLING DYNAMICS

Advanced cycling data provides insights into your performance across different conditions 3 .

MTB DYNAMICS

MTB Dynamics with grit, flow & jump analyses provide all the data you need to analyse your run even more precisely.

GRIT® AND FLOW™ MEASUREMENTS

The Grit value indicates the difficulty of a trail. Flow indicates how fluid your riding style is. Based on these values, you can evaluate your performance and work on it.

TURN INSTRUCTIONS

Stay reliably on the right path with turn-by-turn directions and alerts and reach your destination reliably, even on unfamiliar trails.

 

BACK TO START

Did you get lost or want to head back early? With the Tracback® feature, you can easily find your way back to your starting point.

FOOD AND DRINK ALARMS

To ensure you don't run out of energy during your runs, notifications remind you to drink or eat something.

 
 
 
 

SAFETY AND ASSISTANCE


COMMUNITY DANGEROUS POINTS

Share information about hazards with the community 1 and get more information about potholes or obstacles. Hazards are also displayed in the Edge route planner, allowing you to plan routes more safely in advance.

VARIA™ COMPATIBILITY

Pair your Edge with Varia radar and smart bike lights to see and be seen.

ACCIDENT NOTIFICATION

If an accident is detected, a message with your location 2 is sent to predefined emergency contacts . The GroupRide feature now also warns you if other members of the group have an accident.

LIVETRACK™ FUNCTION

Your loved ones can follow your position in real time and view data such as speed and planned routes 1 .

BIKE ALARM

A PIN-protected alarm warns you via your compatible smartphone if your bike is moved.

 

INREACH® COMPATIBLE

If you want to stay connected throughout your rides, pair your Edge cycling computer with your inReach satellite communicator 4 .

 
 
 
 
 

ALWAYS UP-TO-DATE


SMART NOTIFICATIONS

Receive text messages and alerts on your Edge cycling computer when paired with your smartphone.

COMPATIBLE WITH SMART TRAINERS

This Edge can be paired with your indoor trainer to record your rides at home.

E-BIKE COMPATIBILITY

Connect to your ANT+® compatible e-bike.

CONNECT IQ™ STORE

Download custom data fields, apps, and widgets in the Connect IQ Store app.

INTEGRATION WITH ELECTRONIC SWITCHING GROUPS

Use the shift levers of compatible electronic groupsets (Shimano Di2 or SRAM RED AXS) to control your Edge's settings and to browse data pages, for example.

TestVar id: 71 userid: 17 name: GARMIN TACX FLUX S Smart тренажер VIP: 0 cat: 45 subcat: 5 subsubcat: 11 manufacturer: model: status: 1 image1: 17_2024_29781714007381.webp image2: image3: image4: image5: image6: image7: image8: image9: image10: image11: image12: short_description: <p>The FLUX S Smart checks all the boxes when you are looking for a Smart direct drive trainer. Reliable, accurate, silent, strong and offering a good ride feel. This bike trainer is the ideal indoor training companion for the many hours sweating and cycling with your favourite apps.</p> description: <p><iframe src="https://www.youtube.com/embed/l5--jinFLRQ" frameborder="0" width="100%" height="399"></iframe></p> <div class="row"> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>ACCURATE</h4> Measures your power accurately within 3,0%.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SILENT</h4> The most silent flywheel equipped bike trainer available.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SMART TRAINER</h4> Connect to popular training apps, like Zwift &amp; Tacx.</div> </div> <div class="row"> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SIMULATION RANGE</h4> Realistically simulate inclines up to a 10% gradient.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SPRINT</h4> A strong trainer with a maximum sprint resistance of 1500 watts.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>HEAVY FLYWHEEL</h4> A large 7,0 kg flywheel ensures the best ride feel.</div> </div> <p>ЛИНК со сите детали - <a href="https://tacx.com/product/flux-s-smart/" rel="noopener noreferrer" target="_blank">https://tacx.com/product/flux-s-smart/</a>Спецификации</p> <h2>FEATURES &amp; SPECIFICATIONS</h2> <table class="shop_attributes swiper_autoheight"> <tbody> <tr class="alt subheader"><th>FEATURES</th> <td>&nbsp;</td> </tr> <tr><th>Type of trainer</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Working principle of Tacx trainers &lt;/h3&gt; &lt;p&gt;All Tacx trainers are magnetic trainers, the resistance is caused by a magnetic field. You can set the trainer&rsquo;s resistance precisely as required as the magnitude of this field is adjustable. The result is a highly functional, contact- and maintenance-free resistance unit.&lt;/p&gt; &lt;p&gt;The magnetic field is realized differently amid the various types of resistance units, causing a difference in the trainer&rsquo;s functionality and usability. &lt;/p&gt; &lt;p&gt;&lt;strong&gt;Direct drive&lt;/strong&gt;&lt;br /&gt; The bike is placed in the direct drive trainer without its rear wheel; the resistance is applied directly to the rear axle. This causes a more realistic and user-friendly trainer. There are no transmissions causing any loss of power, ensuring a very realistic cycling feeling and accurate measurements of your speed, cadence and power. In addition, there is no wear and no slipping of the tyre; the direct drive is maintenance free and your bike is easily mounted on it.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Motor brake&lt;/strong&gt;&lt;br /&gt; The motor brake is the most advanced resistance unit producing the most realistic cycling feeling. The resistance is calculated and generated by an electromotor. The motor can both hold back (brake) and drive the wheel or chain, enabling the simulation of a descent. It will keep spinning; just like outdoors you do not have to pedal. This downhill drive feature also enables a realistic simulation of the dead point in your pedal stroke. In addition, the motor brake is the most powerful and can generate high resistance at low speeds. This makes the motor brake especially suited for simulating steep climbs. Due to these features, Tacx trainers with a motor brake are ideally suited for training on mountain stages.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Wireless motor brake&lt;/strong&gt;&lt;br /&gt; A wireless motor brake is an electromotor with a generator; it generates its own energy from your pedal stroke. The trainer uses this energy to communicate and produce the needed resistance. As the trainer does not require an external power source, it can be placed anywhere you like. &lt;/p&gt; &lt;p&gt;As its power is generated from your movement, the trainer cannot simulate a descent. You are not pedalling, so it cannot generate any energy.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Electro brake&lt;/strong&gt;&lt;br /&gt; An electro brake features one row with electromagnets and one with permanent magnets, with a rotating disc in between. The resistance is set automatically by increasing or decreasing the current through the electromagnets.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Magnet brake&lt;/strong&gt;&lt;br /&gt; The resistance is realized by permanent magnets so trainers with a magnet brake do not require power. The Booster features two rows of magnets; other basic trainers feature one row of magnets and a disc. The magnetic field increases or decreases by changing the position of the magnets, which is done manually with a lever to set the resistance. &lt;/p&gt; &lt;p&gt;The Satori Smart is equipped with a long-life battery to enable communication.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/11/Tacx-trainers-working-principle-1920x1080px-1.jpg">Interactive Smart direct drive with electric brake</span></td> </tr> <tr class="alt"><th>Magnets</th> <td><span data-title="" data-content="" data-image="">8 Permanent ferrite magnets &amp; 8 electromagnets</span></td> </tr> <tr><th>Transmission</th> <td><span data-title="" data-content="" data-image="">None</span></td> </tr> <tr class="alt"><th>Electrical requirements</th> <td><span data-title="" data-content="" data-image="">110-240 Volt</span></td> </tr> <tr><th>Power indicator</th> <td><span data-title="" data-content="" data-image="">None</span></td> </tr> <tr class="alt"><th>Connection indicator (ANT/BT)</th> <td><span data-title="" data-content="" data-image="">2 LEDs</span></td> </tr> <tr><th>Firmware upgradable</th> <td><span data-title="" data-content="" data-image="">Yes</span></td> </tr> <tr class="alt"><th>Suitable cassettes</th> <td><span data-title="" data-content="" data-image="">Not suitable for Specialized SCS system&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Shimano &amp; SRAM: 8 - 11 speed. Campagnolo, SRAM XD and XD-R body sold separately</span></td> </tr> <tr><th>Suitable axles</th> <td><span data-title="" data-content="" data-image="">Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available</span></td> </tr> <tr class="alt"><th>Suitable bikes</th> <td><span data-title="" data-content="" data-image="">Race, Tri &amp; MTB</span></td> </tr> <tr><th>Supplied with</th> <td><span data-title="" data-content="" data-image="">Quick release for road bikes and mountain bikes (5mm)&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">1 month Tacx Premium software</span></td> </tr> <tr class="alt subheader-padding"><th>&nbsp;</th> <td>&nbsp;</td> </tr> <tr class="alt subheader"><th>SPECIFICATIONS</th> <td>&nbsp;</td> </tr> <tr><th>Max. power (40 km/h)</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Brake force &amp; brake power&lt;/h3&gt; &lt;p&gt;The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines.&lt;/p&gt; &lt;p&gt;The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer&rsquo;s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation.&lt;/p&gt; &lt;p&gt;The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider&rsquo;s weight. This results in the most realistic simulation.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">1500 Watt</span></td> </tr> <tr class="alt"><th>Max. incline</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Brake force &amp; brake power&lt;/h3&gt; &lt;p&gt;The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines.&lt;/p&gt; &lt;p&gt;The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer&rsquo;s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation.&lt;/p&gt; &lt;p&gt;The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider&rsquo;s weight. This results in the most realistic simulation.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">10%</span></td> </tr> <tr><th>Simulation of descent</th> <td><span data-title="" data-content="" data-image="">No</span></td> </tr> <tr class="alt"><th>Max. torque</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Brake force &amp; brake power&lt;/h3&gt; &lt;p&gt;The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines.&lt;/p&gt; &lt;p&gt;The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer&rsquo;s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation.&lt;/p&gt; &lt;p&gt;The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider&rsquo;s weight. This results in the most realistic simulation.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">22.1 Nm</span></td> </tr> <tr><th>Max. brake force</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Brake force &amp; brake power&lt;/h3&gt; &lt;p&gt;The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines.&lt;/p&gt; &lt;p&gt;The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer&rsquo;s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation.&lt;/p&gt; &lt;p&gt;The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider&rsquo;s weight. This results in the most realistic simulation.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">65 N</span></td> </tr> <tr class="alt"><th>Flywheel</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;The flywheel&lt;/h3&gt; &lt;p&gt;To make the cycling feeling as realistic as possible, all Tacx trainers are equipped with a flywheel. When you are cycling outdoors and stop pedalling, your bike does not stop rolling immediately. The same effect is seen in the dead point of your pedal stroke. The kinetic energy causing the bike to keep rolling is simulated by the trainer&rsquo;s flywheel; this is called the flywheel effect or mass inertia. The heavier the flywheel, the more realistic the cycling feeling. &lt;/p&gt; &lt;p&gt;&lt;strong&gt;Virtual flywheel&lt;/strong&gt;&lt;br /&gt; Tacx trainers are equipped with an actual or a virtual flywheel. The best experience is achieved with an exact simulation of the rider&rsquo;s weight, which is only possible with a virtual flywheel. In this case, the trainer simulates the mass inertia instead of producing it with an actual flywheel. In contrast to the actual flywheel, the virtual flywheel can adjust the mass inertia to the circumstances; like speed, slope and weight. For example, when you ride up a mountain you will experience a different cycling feeling than when you are riding with high speed on a flat road. Therefore, the virtual flywheel is the best solution for an optimal cycling experience.&lt;/p&gt; &lt;p&gt;Trainers equipped with a virtual flywheel are the NEO Smart and Genius models. The Bushido Smart is a combination of an actual and virtual flywheel.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-flywheel-1920x1080px-1-1920x1080.jpg">Actual of 7 kg</span></td> </tr> <tr><th>Mass inertia</th> <td><span data-title="" data-content="" data-image="">22.8kg (50.3 lbs)</span></td> </tr> <tr class="alt"><th>Calibration</th> <td><span data-title="" data-content="" data-image="">Spin down</span></td> </tr> <tr><th>Footprint (lxw)</th> <td><span data-title="" data-content="" data-image="">670 x 642 mm (26.4 x 25.3 in)</span></td> </tr> <tr class="alt"><th>Height</th> <td><span data-title="" data-content="" data-image="">460 mm (18.1 in)</span></td> </tr> <tr><th>Dimensions when folded</th> <td><span data-title="" data-content="" data-image="">Not foldable</span></td> </tr> <tr class="alt"><th>Weight</th> <td><span data-title="" data-content="" data-image="">22.8kg (50.3lbs)</span></td> </tr> <tr><th>Article number</th> <td>T2900S</td> </tr> <tr class="alt subheader-padding"><th>&nbsp;</th> <td>&nbsp;</td> </tr> <tr class="alt subheader"><th>DATA OUTPUT AND CONTROL</th> <td>&nbsp;</td> </tr> <tr><th>Wireless communication</th> <td><span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Smart technology&lt;/h3&gt; &lt;p&gt;Smart technology refers to the Smart electronics products use to communicate. Tacx Smart trainers can be connected to any device, and several devices simultaneously, as they communicate via ANT+ and Bluetooth&reg; Smart.&lt;/p&gt; &lt;p&gt;Tacx Smart trainers are characterized by the following features:&lt;br /&gt; 1. Open wireless communication&lt;br /&gt; 2. Measuring and receiving performance data&lt;br /&gt; 3. Upgradable firmware&lt;br /&gt; 4. Standalone training&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Open wireless communication&lt;/strong&gt;&lt;br /&gt; The functionality of Tacx Smart trainers is improved by enabling the communication with as many devices and apps as possible. This way you can use almost any training option. This is realized by using standardized wireless communication protocols: ANT+ FE-C and Bluetooth Smart open.&lt;/p&gt; &lt;p&gt;&lt;em&gt;ANT+ FE-C protocol&lt;/em&gt;&lt;br /&gt; The ANT+ FE-C protocol enables Smart trainers to communicate with third party software on desktops, bike computers and sport watches. The interactive trainers can be controlled by Tacx software, or other computer software like Zwift and the Garmin Edge 520.&lt;/p&gt; &lt;p&gt;We got to work directly after ANT+ launched the ANT+ FE-C protocol. The result: our indoor trainers are the first to be ANT+ FE-C certified and use the new language. ANT+ FE-C stands for &ldquo;ANT+ Fitness Equipment Control&rdquo;. Until now, trainers of various brands communicated in their own language. Therefore they did not understand each other and could not communicate. By implementing the new language &ndash; the ANT+ FE-C open profile &ndash; in trainers and software they are able to communicate and connect with each other.&lt;/p&gt; &lt;p&gt;&lt;em&gt;Bluetooth Smart&lt;/em&gt;&lt;br /&gt; This is also called Bluetooth 4.0 and Bluetooth low energy and enables communication with smartphones, tablets and sport watches. With Bluetooth Smart the interactive trainers are controlled by Tacx apps and other apps such as TrainerRoad and Kinomap.&lt;/p&gt; &lt;p&gt;After creating the ANT+ FE-C open protocol, we started creating an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal, not the ANT+ signal. By sending the same language as the ANT+ FE-C protocol via Bluetooth, Smart trainers can also communicate with third party apps on devices that only have a Bluetooth receiver. This protocol has been created by Tacx and is available to software manufacturers, so that everybody can link a Tacx Smart trainer to the software of their choice.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Connect to multiple devices simultaneously&lt;br /&gt; &lt;/strong&gt;As the trainer uses both communication protocols, it can connect to several devices at the same time. For example, you can ride a Tacx Film on your tablet while reading and storing your performance data in Garmin Connect on your bike computer. This way you can keep track of your performance in your favourite apps.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Measure and receive performance data&lt;br /&gt; &lt;/strong&gt;All Tacx Smart trainers measure your speed, cadence and power and transmit this via ANT+ and Bluetooth Smart so that it can be received at several devices simultaneously. The interactive trainers can also receive these signals in order to adjust the resistance.&lt;/p&gt; &lt;p&gt;To receive your heart rate you will need a heart rate monitor that communicates via ANT+ or Bluetooth 4.0. The monitor is connected to the app you are using, and the app communicates this to the trainer.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Upgradable firmware&lt;br /&gt; &lt;/strong&gt;Product optimizations and improving the trainers&rsquo; functionalities is a continuous project at Tacx. You can add firmware improvements, for example for the cycling feeling or an extra feature, to the Smart trainer you are already using with the Tacx Utility app. This free app is available in the App store and on Google Play. After installing the app you can test whether there is a firmware update available and if yes, directly upgrade your trainer. This way you always profit from the latest firmware!&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Standalone training&lt;/strong&gt;&lt;br /&gt; Tacx Smart trainers also function without being connected to a device; they will simulate a flat road. This is perfect for straightforward, short training as you simply get on and start riding.&lt;/p&gt; &lt;p&gt;As soon as you start pedalling the trainer recognizes it is not connected and calculates the needed resistance for a flat road. In doing so, it takes all relevant factors into account, like rolling resistance and air resistance. This ensures a very realistic simulation of a flat road. The resistance changes progressively: the higher your speed, the higher the resistance.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Smart-technology-1920x1080px-1920x1080.jpg">ANT+ FE-C&nbsp;</span>,&nbsp;<span class="panel-link" style="box-sizing: border-box; color: #41b6e6; cursor: pointer;" data-title="" data-content="&lt;h3&gt;Smart technology&lt;/h3&gt; &lt;p&gt;Smart technology refers to the Smart electronics products use to communicate. Tacx Smart trainers can be connected to any device, and several devices simultaneously, as they communicate via ANT+ and Bluetooth&reg; Smart.&lt;/p&gt; &lt;p&gt;Tacx Smart trainers are characterized by the following features:&lt;br /&gt; 1. Open wireless communication&lt;br /&gt; 2. Measuring and receiving performance data&lt;br /&gt; 3. Upgradable firmware&lt;br /&gt; 4. Standalone training&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Open wireless communication&lt;/strong&gt;&lt;br /&gt; The functionality of Tacx Smart trainers is improved by enabling the communication with as many devices and apps as possible. This way you can use almost any training option. This is realized by using standardized wireless communication protocols: ANT+ FE-C and Bluetooth Smart open.&lt;/p&gt; &lt;p&gt;&lt;em&gt;ANT+ FE-C protocol&lt;/em&gt;&lt;br /&gt; The ANT+ FE-C protocol enables Smart trainers to communicate with third party software on desktops, bike computers and sport watches. The interactive trainers can be controlled by Tacx software, or other computer software like Zwift and the Garmin Edge 520.&lt;/p&gt; &lt;p&gt;We got to work directly after ANT+ launched the ANT+ FE-C protocol. The result: our indoor trainers are the first to be ANT+ FE-C certified and use the new language. ANT+ FE-C stands for &ldquo;ANT+ Fitness Equipment Control&rdquo;. Until now, trainers of various brands communicated in their own language. Therefore they did not understand each other and could not communicate. By implementing the new language &ndash; the ANT+ FE-C open profile &ndash; in trainers and software they are able to communicate and connect with each other.&lt;/p&gt; &lt;p&gt;&lt;em&gt;Bluetooth Smart&lt;/em&gt;&lt;br /&gt; This is also called Bluetooth 4.0 and Bluetooth low energy and enables communication with smartphones, tablets and sport watches. With Bluetooth Smart the interactive trainers are controlled by Tacx apps and other apps such as TrainerRoad and Kinomap.&lt;/p&gt; &lt;p&gt;After creating the ANT+ FE-C open protocol, we started creating an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal, not the ANT+ signal. By sending the same language as the ANT+ FE-C protocol via Bluetooth, Smart trainers can also communicate with third party apps on devices that only have a Bluetooth receiver. This protocol has been created by Tacx and is available to software manufacturers, so that everybody can link a Tacx Smart trainer to the software of their choice.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Connect to multiple devices simultaneously&lt;br /&gt; &lt;/strong&gt;As the trainer uses both communication protocols, it can connect to several devices at the same time. For example, you can ride a Tacx Film on your tablet while reading and storing your performance data in Garmin Connect on your bike computer. This way you can keep track of your performance in your favourite apps.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Measure and receive performance data&lt;br /&gt; &lt;/strong&gt;All Tacx Smart trainers measure your speed, cadence and power and transmit this via ANT+ and Bluetooth Smart so that it can be received at several devices simultaneously. The interactive trainers can also receive these signals in order to adjust the resistance.&lt;/p&gt; &lt;p&gt;To receive your heart rate you will need a heart rate monitor that communicates via ANT+ or Bluetooth 4.0. The monitor is connected to the app you are using, and the app communicates this to the trainer.&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Upgradable firmware&lt;br /&gt; &lt;/strong&gt;Product optimizations and improving the trainers&rsquo; functionalities is a continuous project at Tacx. You can add firmware improvements, for example for the cycling feeling or an extra feature, to the Smart trainer you are already using with the Tacx Utility app. This free app is available in the App store and on Google Play. After installing the app you can test whether there is a firmware update available and if yes, directly upgrade your trainer. This way you always profit from the latest firmware!&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Standalone training&lt;/strong&gt;&lt;br /&gt; Tacx Smart trainers also function without being connected to a device; they will simulate a flat road. This is perfect for straightforward, short training as you simply get on and start riding.&lt;/p&gt; &lt;p&gt;As soon as you start pedalling the trainer recognizes it is not connected and calculates the needed resistance for a flat road. In doing so, it takes all relevant factors into account, like rolling resistance and air resistance. This ensures a very realistic simulation of a flat road. The resistance changes progressively: the higher your speed, the higher the resistance.&lt;/p&gt; " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Smart-technology-1920x1080px-1920x1080.jpg">Bluetooth Smart open</span></td> </tr> <tr class="alt"><th>Control by</th> <td><span data-title="" data-content="" data-image="">ANT+FE-C bike computers&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Connect to computer via ANT+antenna&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Smartphone&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Stand alone&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Tablet</span></td> </tr> <tr><th>Output</th> <td><span data-title="" data-content="" data-image="">Cadence&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Power&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Speed</span></td> </tr> <tr class="alt"><th>Read out on</th> <td><span data-title="" data-content="" data-image="">Bike computer&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Computer with ANT+ antenna&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Smartphone&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Sports watch&nbsp;</span>,&nbsp;<span data-title="" data-content="" data-image="">Tablet</span></td> </tr> <tr><th>Accuracy</th> <td><span data-title="" data-content="" data-image="">&lt;3%</span></td> </tr> </tbody> </table> characteristics: meta_title: meta_keywords: meta_description: url: measure: order_by: 0 date_created: 2024-10-14 15:55:14 width: profile: diameter: fuel_efficiency: wet_grip: noise: supplier: delivery_days: 0 image: 17_2024_29781714007381.webp price: 43480.00 price2: 0.00 item_id: 69

Слични продукти