GARMIN edge 830 Sensor Bundle

Performance GPS cycling computer with mapping and touchscreen

Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more¹

Cycling safety features² include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia^™ rearview radar and lights so you can see and be seen

Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings

Customise with free apps, widgets and data fields from the Connect IQ^™ Store

MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time

Battery life: up to 20 hours with GPS; extendable up to 40 hours with the optional Garmin Charge^™ power pack or in battery save mode

28.980 ден. 31980.00

-9%

Бесплатна достава во Македонија. Рок за испорака 1-3 работни дена.

Who cares that the Edge 830 touchscreen cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you're a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 830 is ready to roll as your new riding partner.

Take your training to the next level

Edge 830 goes beyond data collection — providing dynamic performance insights that can help you beat your best. See how your body is holding up in different environments with heat and altitude acclimation¹. Get in-ride notifications when it's time to hydrate or eat. See if your most recent training was balanced in terms of endurance, threshold and high-intensity efforts. When paired with compatible Garmin sensors, Edge 830 even calculates power curve, a new power tracking metric that compares your ride effort to your previous weeks and months. No matter where you train, you can sync structured workouts from TrainingPeaks^™ and our online fitness community, Garmin Connect^™, right to your Edge. You can also view your upcoming training for the week and launch into the relevant workout seamlessly when required.

Ride with confidence

Whether you're training with riding buddies or commuting to work, your Edge 830 device takes safety seriously. It allows for group messaging and tracking, so you can stay in touch when you get separated from the pack². It also has incident detection, which automatically sends your location to emergency contacts if it detects an incident. For even more awareness, pair Edge 830 with our Varia rearview radar and lights so you can see and be seen. And the new PIN-protected bike alarm will notify you on your smartphone if your bike is moved while you're inside getting water or making a pit stop.

Navigate every turn

Edge 830 is preloaded with the Garmin Cycle Map, including turn-by-turn directions and navigation alerts that notify you of upcoming turns. Use the bright, responsive touchscreen to create new rides and courses right on the Edge device. To help you ride like a local, popularity routing chooses from the roads and trails most travelled by fellow cyclists. Edge 830 is smart enough to guide you back to the route — or back to start — if you deviate from it or decide to head home early. With route calculation speeds 2 times faster than previous models, you'll spend more time riding, not waiting around.

Tame the trails

When you need a change of scenery, Edge 830 is your go-to guide for mountain biking. Start by downloading the free Trailforks app from our Connect IQ Store and then unlocking the Trailforks data on your Edge. Featuring trails from more than 80 countries, Trailforks includes the best, most up-to-date information, including trail conditions, heatmaps and more. When you stop mid-ride, the new Forksight mode automatically displays upcoming forks in the trail and gives you context by showing where you are within a trail network. During the ride, Edge 830 tracks the epic details with new mountain biking metrics such as jump count, jump distance and hang time. Other mountain biking features include Grit, which rates the difficulty of a ride using GPS, elevation and accelerometer data, and Flow, which measures how smoothly you descend a trail so you have a score to beat next time.

Climb like a pro

Climbing can become your secret weapon with Edge 830 and the new ClimbPro feature. It automatically shows the remaining ascent and grade when you're climbing while following a route or course. This shows you how much you have left to suffer, helping you gauge your effort over the remainder of your ride.

SHIMANO STEPS eBike system

Pair a compatible Edge cycling computer with a supported SHIMANO STEPS eBike system, and receive a dedicated eBike status screen, data fields and support for system status and warning messages. In addition to Edge metrics — such as time, distance and speed — you can also view your assist level, gear position, battery life and remaining range during a ride.

Customise your device

Only Garmin lets you customise your device with free apps, widgets and data fields from the Connect IQ Store. Apps such as the AccuWeather MinuteCast let you know when the rain will stop so you can determine the ideal time slot for your ride. And if you plan your rides on sites such as Strava, Komoot or Wikiloc, download those apps so you can have your favourite routes imported directly to your Edge. Or if you're looking for a nearby café or bike shop, use the Yelp app to download their locations, and route directly to them on your Edge device.

¹When paired with compatible sensors ²When paired with a compatible smartphone. See safety and tracking features requirements and limitations

TrainingPeaks^® is registered trademarks of Peaksware, LLC.

TestVar id: 70 userid: 17 name: GARMIN Tacx FLUX 2 Smart тренажер VIP: 0 cat: 45 subcat: 5 subsubcat: 11 manufacturer: model: status: 1 image1: 17_2024_88671714007380.webp image2: image3: image4: image5: image6: image7: image8: image9: image10: image11: image12: short_description: The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. description: <iframe src="https://www.youtube.com/embed/l5--jinFLRQ" frameborder="0" width="100%" height="399"></iframe> <div class="row"> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>ACCURATE</h4> Measures your power accurately within 2,5%.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SILENT</h4> The most silent flywheel equipped bike trainer available.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SMART TRAINER</h4> Connect to popular training apps, like Zwift & Tacx.</div> </div>   <div class="row"> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SIMULATION RANGE</h4> Realistically simulate inclines up to a 16% gradient.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>SPRINT</h4> A strong trainer with a maximum sprint resistance of 2000 watts.</div> <div class=" col-md-4 col-sm-12 col-xs-12"> <h4>HEAVY FLYWHEEL</h4> A large 7,6 kg flywheel ensures the best ride feel.</div> </div> Линк со детали за производот - <a href="https://tacx.com/product/flux-2-smart/" rel="noopener noreferrer" target="_blank">https://tacx.com/product/flux-2-smart/</a> <h2>Спецификации</h2> <table class="shop_attributes swiper_autoheight"> <tbody> <tr class="alt subheader"><th>FEATURES</th> <td> </td> </tr> <tr><th>Type of trainer</th> <td>Working principle of Tacx trainers </h3> All Tacx trainers are magnetic trainers, the resistance is caused by a magnetic field. You can set the trainer’s resistance precisely as required as the magnitude of this field is adjustable. The result is a highly functional, contact- and maintenance-free resistance unit. The magnetic field is realized differently amid the various types of resistance units, causing a difference in the trainer’s functionality and usability. Direct drive The bike is placed in the direct drive trainer without its rear wheel; the resistance is applied directly to the rear axle. This causes a more realistic and user-friendly trainer. There are no transmissions causing any loss of power, ensuring a very realistic cycling feeling and accurate measurements of your speed, cadence and power. In addition, there is no wear and no slipping of the tyre; the direct drive is maintenance free and your bike is easily mounted on it. Motor brake The motor brake is the most advanced resistance unit producing the most realistic cycling feeling. The resistance is calculated and generated by an electromotor. The motor can both hold back (brake) and drive the wheel or chain, enabling the simulation of a descent. It will keep spinning; just like outdoors you do not have to pedal. This downhill drive feature also enables a realistic simulation of the dead point in your pedal stroke. In addition, the motor brake is the most powerful and can generate high resistance at low speeds. This makes the motor brake especially suited for simulating steep climbs. Due to these features, Tacx trainers with a motor brake are ideally suited for training on mountain stages. Wireless motor brake A wireless motor brake is an electromotor with a generator; it generates its own energy from your pedal stroke. The trainer uses this energy to communicate and produce the needed resistance. As the trainer does not require an external power source, it can be placed anywhere you like. As its power is generated from your movement, the trainer cannot simulate a descent. You are not pedalling, so it cannot generate any energy. Electro brake An electro brake features one row with electromagnets and one with permanent magnets, with a rotating disc in between. The resistance is set automatically by increasing or decreasing the current through the electromagnets. Magnet brake The resistance is realized by permanent magnets so trainers with a magnet brake do not require power. The Booster features two rows of magnets; other basic trainers feature one row of magnets and a disc. The magnetic field increases or decreases by changing the position of the magnets, which is done manually with a lever to set the resistance. The Satori Smart is equipped with a long-life battery to enable communication. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/11/Tacx-trainers-working-principle-1920x1080px-1.jpg">Interactive Smart direct drive with electric brake</td> </tr> <tr class="alt"><th>Magnets</th> <td>8 Permanent ferrite magnets & 8 electromagnets</td> </tr> <tr><th>Transmission</th> <td>None</td> </tr> <tr class="alt"><th>Electrical requirements</th> <td>110-240 Volt</td> </tr> <tr><th>Power indicator</th> <td>None</td> </tr> <tr class="alt"><th>Connection indicator (ANT/BT)</th> <td>2 LEDs</td> </tr> <tr><th>Firmware upgradable</th> <td>Yes</td> </tr> <tr class="alt"><th>Suitable cassettes</th> <td>Not suitable for Specialized SCS system , Shimano & SRAM: 8 - 11 speed. Campagnolo, SRAM XD and XD-R body sold separately</td> </tr> <tr><th>Suitable axles</th> <td>Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.</td> </tr> <tr class="alt"><th>Suitable bikes</th> <td>Race, Tri & MTB</td> </tr> <tr><th>Supplied with</th> <td>Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software</td> </tr> <tr class="alt subheader-padding"><th> </th> <td> </td> </tr> <tr class="alt subheader"><th>SPECIFICATIONS</th> <td> </td> </tr> <tr><th>Max. power (40 km/h)</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">2000 Watt</td> </tr> <tr class="alt"><th>Max. incline</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">16%</td> </tr> <tr><th>Simulation of descent</th> <td>No</td> </tr> <tr class="alt"><th>Max. torque</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">41 Nm</td> </tr> <tr><th>Max. brake force</th> <td>Brake force & brake power</h3> The brake power of the trainer is the result of the brake force and mass inertia of the trainer and dependent on your speed. For example, a NEO Smart is capable of generating 2200W at 40km/h, while a Vortex can power up to 950W at this speed. A trainer with high brake power can generate high resistance at low speeds, so it can realistically simulate steep inclines. The higher the brake force, the steeper the incline can be simulated at a certain weight. For example, the NEO has a brake force of 250N and can therefore simulate a slope realistically up to 25% at a weight of 75kg. The trainer’s brake force, expressed in Newtons (N), is defined by the structural architecture that causes the resistance, like the kind and amount of magnets. Which brake force is required for an accurate simulation is defined by the weight, slope, air resistance and rolling resistance. All these factors are taken into account in the simulation. The mass inertia represents the needed energy to set the flywheel in motion or accelerate it. In contrast to an actual flywheel, a virtual flywheel can change the mass inertia precisely to the conditions; like speed, slope and weight. Therefore, a virtual flywheel is adjusted to accurately simulate the rider’s weight. This results in the most realistic simulation. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-brake-force-1920x1080px-1920x1080.jpg">120 N</td> </tr> <tr class="alt"><th>Flywheel</th> <td>The flywheel</h3> To make the cycling feeling as realistic as possible, all Tacx trainers are equipped with a flywheel. When you are cycling outdoors and stop pedalling, your bike does not stop rolling immediately. The same effect is seen in the dead point of your pedal stroke. The kinetic energy causing the bike to keep rolling is simulated by the trainer’s flywheel; this is called the flywheel effect or mass inertia. The heavier the flywheel, the more realistic the cycling feeling. Virtual flywheel Tacx trainers are equipped with an actual or a virtual flywheel. The best experience is achieved with an exact simulation of the rider’s weight, which is only possible with a virtual flywheel. In this case, the trainer simulates the mass inertia instead of producing it with an actual flywheel. In contrast to the actual flywheel, the virtual flywheel can adjust the mass inertia to the circumstances; like speed, slope and weight. For example, when you ride up a mountain you will experience a different cycling feeling than when you are riding with high speed on a flat road. Therefore, the virtual flywheel is the best solution for an optimal cycling experience. Trainers equipped with a virtual flywheel are the NEO Smart and Genius models. The Bushido Smart is a combination of an actual and virtual flywheel. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Tacx-trainers-flywheel-1920x1080px-1-1920x1080.jpg">Actual of 7.6 kg</td> </tr> <tr><th>Mass inertia</th> <td>31.2kg</td> </tr> <tr class="alt"><th>Calibration</th> <td>Spin down</td> </tr> <tr><th>Footprint (lxw)</th> <td>670 x 642 mm (26.4 x 25.3 in)</td> </tr> <tr class="alt"><th>Height</th> <td>460 mm (18.1 in)</td> </tr> <tr><th>Dimensions when folded</th> <td>Not foldable</td> </tr> <tr class="alt"><th>Weight</th> <td>23.6kg (52lbs)</td> </tr> <tr><th>Article number</th> <td>T2980</td> </tr> <tr class="alt subheader-padding"><th> </th> <td> </td> </tr> <tr class="alt subheader"><th>DATA OUTPUT AND CONTROL</th> <td> </td> </tr> <tr><th>Wireless communication</th> <td>Smart technology</h3> Smart technology refers to the Smart electronics products use to communicate. Tacx Smart trainers can be connected to any device, and several devices simultaneously, as they communicate via ANT+ and Bluetooth® Smart. Tacx Smart trainers are characterized by the following features: 1. Open wireless communication 2. Measuring and receiving performance data 3. Upgradable firmware 4. Standalone training Open wireless communication The functionality of Tacx Smart trainers is improved by enabling the communication with as many devices and apps as possible. This way you can use almost any training option. This is realized by using standardized wireless communication protocols: ANT+ FE-C and Bluetooth Smart open. ANT+ FE-C protocol The ANT+ FE-C protocol enables Smart trainers to communicate with third party software on desktops, bike computers and sport watches. The interactive trainers can be controlled by Tacx software, or other computer software like Zwift and the Garmin Edge 520. We got to work directly after ANT+ launched the ANT+ FE-C protocol. The result: our indoor trainers are the first to be ANT+ FE-C certified and use the new language. ANT+ FE-C stands for “ANT+ Fitness Equipment Control”. Until now, trainers of various brands communicated in their own language. Therefore they did not understand each other and could not communicate. By implementing the new language – the ANT+ FE-C open profile – in trainers and software they are able to communicate and connect with each other. Bluetooth Smart This is also called Bluetooth 4.0 and Bluetooth low energy and enables communication with smartphones, tablets and sport watches. With Bluetooth Smart the interactive trainers are controlled by Tacx apps and other apps such as TrainerRoad and Kinomap. After creating the ANT+ FE-C open protocol, we started creating an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal, not the ANT+ signal. By sending the same language as the ANT+ FE-C protocol via Bluetooth, Smart trainers can also communicate with third party apps on devices that only have a Bluetooth receiver. This protocol has been created by Tacx and is available to software manufacturers, so that everybody can link a Tacx Smart trainer to the software of their choice. Connect to multiple devices simultaneously As the trainer uses both communication protocols, it can connect to several devices at the same time. For example, you can ride a Tacx Film on your tablet while reading and storing your performance data in Garmin Connect on your bike computer. This way you can keep track of your performance in your favourite apps. Measure and receive performance data All Tacx Smart trainers measure your speed, cadence and power and transmit this via ANT+ and Bluetooth Smart so that it can be received at several devices simultaneously. The interactive trainers can also receive these signals in order to adjust the resistance. To receive your heart rate you will need a heart rate monitor that communicates via ANT+ or Bluetooth 4.0. The monitor is connected to the app you are using, and the app communicates this to the trainer. Upgradable firmware Product optimizations and improving the trainers’ functionalities is a continuous project at Tacx. You can add firmware improvements, for example for the cycling feeling or an extra feature, to the Smart trainer you are already using with the Tacx Utility app. This free app is available in the App store and on Google Play. After installing the app you can test whether there is a firmware update available and if yes, directly upgrade your trainer. This way you always profit from the latest firmware! Standalone training Tacx Smart trainers also function without being connected to a device; they will simulate a flat road. This is perfect for straightforward, short training as you simply get on and start riding. As soon as you start pedalling the trainer recognizes it is not connected and calculates the needed resistance for a flat road. In doing so, it takes all relevant factors into account, like rolling resistance and air resistance. This ensures a very realistic simulation of a flat road. The resistance changes progressively: the higher your speed, the higher the resistance. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Smart-technology-1920x1080px-1920x1080.jpg">ANT+ FE-C , Smart technology</h3> Smart technology refers to the Smart electronics products use to communicate. Tacx Smart trainers can be connected to any device, and several devices simultaneously, as they communicate via ANT+ and Bluetooth® Smart. Tacx Smart trainers are characterized by the following features: 1. Open wireless communication 2. Measuring and receiving performance data 3. Upgradable firmware 4. Standalone training Open wireless communication The functionality of Tacx Smart trainers is improved by enabling the communication with as many devices and apps as possible. This way you can use almost any training option. This is realized by using standardized wireless communication protocols: ANT+ FE-C and Bluetooth Smart open. ANT+ FE-C protocol The ANT+ FE-C protocol enables Smart trainers to communicate with third party software on desktops, bike computers and sport watches. The interactive trainers can be controlled by Tacx software, or other computer software like Zwift and the Garmin Edge 520. We got to work directly after ANT+ launched the ANT+ FE-C protocol. The result: our indoor trainers are the first to be ANT+ FE-C certified and use the new language. ANT+ FE-C stands for “ANT+ Fitness Equipment Control”. Until now, trainers of various brands communicated in their own language. Therefore they did not understand each other and could not communicate. By implementing the new language – the ANT+ FE-C open profile – in trainers and software they are able to communicate and connect with each other. Bluetooth Smart This is also called Bluetooth 4.0 and Bluetooth low energy and enables communication with smartphones, tablets and sport watches. With Bluetooth Smart the interactive trainers are controlled by Tacx apps and other apps such as TrainerRoad and Kinomap. After creating the ANT+ FE-C open protocol, we started creating an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal, not the ANT+ signal. By sending the same language as the ANT+ FE-C protocol via Bluetooth, Smart trainers can also communicate with third party apps on devices that only have a Bluetooth receiver. This protocol has been created by Tacx and is available to software manufacturers, so that everybody can link a Tacx Smart trainer to the software of their choice. Connect to multiple devices simultaneously As the trainer uses both communication protocols, it can connect to several devices at the same time. For example, you can ride a Tacx Film on your tablet while reading and storing your performance data in Garmin Connect on your bike computer. This way you can keep track of your performance in your favourite apps. Measure and receive performance data All Tacx Smart trainers measure your speed, cadence and power and transmit this via ANT+ and Bluetooth Smart so that it can be received at several devices simultaneously. The interactive trainers can also receive these signals in order to adjust the resistance. To receive your heart rate you will need a heart rate monitor that communicates via ANT+ or Bluetooth 4.0. The monitor is connected to the app you are using, and the app communicates this to the trainer. Upgradable firmware Product optimizations and improving the trainers’ functionalities is a continuous project at Tacx. You can add firmware improvements, for example for the cycling feeling or an extra feature, to the Smart trainer you are already using with the Tacx Utility app. This free app is available in the App store and on Google Play. After installing the app you can test whether there is a firmware update available and if yes, directly upgrade your trainer. This way you always profit from the latest firmware! Standalone training Tacx Smart trainers also function without being connected to a device; they will simulate a flat road. This is perfect for straightforward, short training as you simply get on and start riding. As soon as you start pedalling the trainer recognizes it is not connected and calculates the needed resistance for a flat road. In doing so, it takes all relevant factors into account, like rolling resistance and air resistance. This ensures a very realistic simulation of a flat road. The resistance changes progressively: the higher your speed, the higher the resistance. " data-image="https://mk0tacxpwbcps2mf5.kinstacdn.com/wp-content/uploads/2016/10/Smart-technology-1920x1080px-1920x1080.jpg">Bluetooth Smart open</td> </tr> <tr class="alt"><th>Control by</th> <td>ANT+FE-C bike computers , Connect to computer via ANT+antenna , Smartphone , Stand alone , Tablet</td> </tr> <tr><th>Output</th> <td>Cadence , Power , Speed</td> </tr> <tr class="alt"><th>Read out on</th> <td>Bike computer , Computer with ANT+ antenna , Smartphone , Sports watch , Tablet</td> </tr> <tr><th>Accuracy</th> <td><2.5%</td> </tr> </tbody> </table> characteristics: meta_title: meta_keywords: meta_description: url: measure: order_by: 0 date_created: 2024-10-14 15:55:14 width: profile: diameter: fuel_efficiency: wet_grip: noise: supplier: delivery_days: 0 image: 17_2024_88671714007380.webp price: 48980.00 price2: 0.00 item_id: 68

Cart